Skip to content

Business

How to calculate your break-even point, with fees included

The break-even formula with card fees in it, a worked example you can check in the calculator, and how to read target-profit units and compare scenarios.

Published
Read time
5 min read
Written by
Victor Solano

Most break-even formulas you'll find online stop at price, cost and fixed cost. If you sell anything through a payment processor, that leaves out the fee taken from every sale, and it makes the answer too low. You'd think you're covered at one number of sales and be short.

This guide is the formula with fees in it, the same one my Break-Even Calculator runs, plus a worked example you can check against the tool. Every number below came out of that calculator's engine, and a test pins them so they can't drift from the code.

#The formula

You need six inputs:

  • Price: what one customer pays.
  • Variable cost per unit: what each sale costs you to deliver (materials, shipping, a per-seat cost).
  • Fixed cost: what you pay no matter how many you sell (the tool you bought, a month of ads, a design job).
  • Percentage fee: the cut taken as a share of the price.
  • Per-sale fee: a flat amount taken on every sale.
  • Target profit: optional, how much you want left after fixed costs.

Then it's four lines:

  1. Fee per sale = price × percentage fee ÷ 100 + per-sale fee.
  2. Contribution margin = price − variable cost − fee per sale. That's what each sale leaves toward your fixed cost.
  3. Break-even units = fixed cost ÷ contribution margin, rounded up to a whole unit.
  4. Break-even revenue = break-even units × price.

Two more numbers fall out of the same margin. Margin ratio is contribution margin ÷ price. Target-profit units is (fixed cost + target profit) ÷ contribution margin, rounded up.

The percentage fee is entered as a plain number, so 2.9 means 2.9%. It has to be at least 0 and under 100, and price has to be above your variable cost plus fees, or there's no margin to divide by and the tool tells you so.

#A worked example

Say I sell a digital template for $40. Each sale costs me $14 to deliver. I spent $3,000 up front on design and a launch. I want $2,000 left over on top of that.

For fees I'll use 2.9% plus $0.30 per sale. That's an example input I picked to show the math, not any provider's price. Use whatever your processor's current fee page says for your account.

  • Percentage fee on a $40 sale: 40 × 2.9% = $1.16.
  • Fee per sale: $1.16 + $0.30 = $1.46.
  • All variable costs and fees per unit: $14 + $1.46 = $15.46.
  • Contribution margin: $40 − $15.46 = $24.54.
  • Margin ratio: 24.54 ÷ 40 = 61.35%.
  • Break-even units: 3,000 ÷ 24.54 = 122.25, so 123 units.
  • Break-even revenue: 123 × $40 = $4,920.
  • Target-profit units: (3,000 + 2,000) ÷ 24.54 = 203.75, so 204 units.

Put the same six numbers into the calculator and you get the same results. If you want to see what the fees cost you, set both fee fields to 0. The margin goes to $26 and break-even drops to 116 units, so the fees add seven sales to the climb.

#Why units round up

122.25 isn't a number of sales. You can't sell a quarter of a template. At 122 units you've collected 122 × 24.54 = $2,993.88 toward the $3,000, which is $6.12 short. So 123 is the first whole sale where you're at or past zero, and that's the number the tool reports.

The chart is a little different. It draws revenue and total cost as straight lines and marks where they cross, which is the unrounded 122.25. The caption under it gives both: the crossing point and the whole-unit target, rounded up. Plan around the whole number.

#Compare two scenarios

The calculator takes two named scenarios side by side, which is the actual use for it. Don't just check "do I break even". Ask what changes if I move one input.

Keep everything above and raise the price to $45. Now the percentage fee is $1.305, the fee per sale is $1.605, and contribution margin is $29.395. Break-even is 3,000 ÷ 29.395 = 102.06, so 103 units and $4,635 in revenue. Target profit needs 171 units.

A $5 price increase saves me 20 sales on the break-even line (123 down to 103). That's the sort of comparison that's hard to do in your head and easy to do with two columns. The question it doesn't answer is whether people will still buy at $45. The math can't tell you that. Only selling can.

#Reading the chart and the export

The chart shows revenue and total cost for the first scenario. Total cost starts at your fixed cost and climbs by the variable cost plus fees per unit. Revenue starts at zero and climbs by the price. Where revenue crosses cost is break-even, and a flatter cost line (a bigger margin) means an earlier crossing.

Export CSV writes one row per scenario with every input and the results: contribution margin, break-even units, break-even revenue, target-profit units and margin ratio. Drop it in a spreadsheet if you want to keep a record of the options you tried.

#What this leaves out

  • Tax. Sales tax, VAT and income tax aren't in the formula. If tax comes out of your price, enter the price after it.
  • Cash-flow timing. Break-even tells you how many sales cover the cost. It doesn't tell you when the money lands. Payouts can lag sales, and you may pay fixed costs first.
  • Currency. The currency selector changes the symbol only. It doesn't convert anything.
  • Changing costs. Everything assumes one price, one variable cost and one fee for all units. Volume discounts or tiered fees would need a separate scenario each.

It's planning math, not financial or tax advice. Check it against your real fee schedule and talk to an accountant for anything with real money on the line.

#Next steps

Run your own numbers in the Break-Even Calculator, or browse the rest of the free browser tools. If you're stuck choosing between options that aren't just about price, the Decision Matrix scores them against criteria you pick.